Prodipe Pro10s - Specifications

Copyright © 2005 IPE Music Page 7
6 - Specifications
Pro5 Pro8 Pro10s
Frequency Response 45Hz -22kHz 45Hz -22kHz 30Hz -150Hz
High Frequency Driver
1” (25 mm)
Silk Dome
1” (25 mm)
Silk Dome
Low Frequency Driver
5” (150 mm)
Glass Aramid Composite Cone
Rubber surround
8” (220 mm)
Glass Aramid Composite Cone
Rubber surround
10" (273 mm) long excursion
Glass Aramid Composite Cone
Rubber surround
AMPLIFICATION
Power
75 Watts 140 Watts 225 Watts
Signal to Noise Ratio (HF/LF)
T.H.D%(HF/LF)
82dB / 90dB
0.05% / 0.02%
86dB / 97dB
0.09% / 0.01%
98 dB
0.05%
Input Impedance
Balanced
Unbalanced
10K Ohm
10K Ohm
10K Ohm
10K Ohm
10K Ohm
10K Ohm
CROSSOVER FREQUENCY
Crossover Frequency
Subsonic Filter
3.0KHz
45Hz
2.4KHz
35Hz
FUSE 5mm x 20mm
100V - 120V
220V - 240V
1A
500mA
2A
1A
3.15A
1.6A
FEATURES
1 XLR Input
1 TRS Input
1 RCA Input
IEC Mains Connector
VOLUME Control
HF LEVEL Control
Blue LED Power Indicator
1 XLR Input
1 TRS Input
1 RCA Input
IEC Mains Connector
VOLUME Control
HF LEVEL Control
Blue LED Power Indicator
2 XLR Inputs and Outputs
2 TRS Inputs and Outputs
2 RCA Inputs and Outputs
IEC Mains Connector
VOLUME Control
LOW-PASS Control
PHASE Changeover Switch
Blue LED Power Indicator
Dimensions (H x W x D) in mm 291 x 196 x 228 381 x 265 x 304 382 x 355 x 398
Net Weight (per unit) 7 Kg 13 Kg 17.7 Kg