Prodys S.L. Tel: +34 91 6896880 Fax: +34 91 6943777 Email: sales@prodys.net Web: www.prodys.com
Page 29
The power on/off button is located in the LED panel. In order to switch on or
switch off the unit, this button must be pressed for longer than 5 seconds.
In addition, an optional battery pack is also available. When the external power
converter is connected, the power is supplied from it, and the battery will be
charged if necessary. When the external power converter is unplugged from the
unit, the battery will take over.
The AC and BAT leds on the LED information panel will inform the user about the
connection of the external power adaptor and the battery. Please refer to
chapter II.3.1 for more information.
To Next Page
Loading...
