Need help?Do you have a question about the Prodys Quantum W and is the answer not in the manual?
General| Brand | Prodys |
|---|---|
| Model | Quantum W |
| Category | Conference System |
| Language | English |
Explains the four main operating modes: Ethernet, 3G/4G, Wi-Fi, and custom.
Covers configuring IP addresses for Ethernet and 3G/4G connections.
Explains how to select network interfaces and establish IP connections.
Covers audio settings and detailed streaming network configuration.
Details network interface selection and connection options.
Details IP port and protocol parameters for the BRAVE protocol.
Details IP port and protocol parameters for ProntoNet V4.
Covers SIP configuration parameters like ports and addresses.
Configures the jitter buffer for overall communication delay.
Explains LAN1 and LAN2 interface behavior and control data.
Sets IP address, mask, gateway, DNS, and DHCP for LAN1.
Configures IP parameters and streaming restrictions for LAN2.
Guides on configuring an external USB Wi-Fi module.
Covers configuring internal 3G/4G modems with APN settings.
Explains how the unit checks and notifies alarm events.
Details alarm categories, selection, and severity levels (Critical, Major, Minor).
Step-by-step guide on how to update the Quantum unit's firmware.
Details updating via LAN connection or direct PC connection.
Covers setting IP addresses for the Quantum and PC during updates.
Guides on launching ProdysFlashPlus and selecting units for update.
Details starting the update process and handling warning messages.
To Next Page
