Prodys S.L. Tel: +34 91 6896880 Fax: +34 91 6943777 Email: sales@prodys.net Web: www.prodys.com
Page 39
IV.2.1.6. Streaming Protocol selection (SIP)
When SIP transmission protocol is selected, this menu contains the SIP
configuration parameters.
The SIP protocol address menu permits the configuration of the ports and the
SIP address involved in the communication.
SIP Port: UDP port dedicated to SIP signalling, for establishing, updating
or finishing a call. Port 5060 is mandatory by the standard if direct calls
without gateways are expected. This port might be changed by the user if
the SIP infrastructure has been set up to run SIP on a different port.
To Next Page
Loading...
