Prodys S.L. Tel: +34 91 6896880 Fax: +34 91 6943777 Email: sales@prodys.net Web: www.prodys.com
Page 38
IV.2.1.5. Streaming Protocol selection (ProntoNet V4)
When Prontonet V4 transmission protocol is selected, this menu is used to set IP
port and protocol parameters. For most applications the default values are
suitable.
Program Port
(UDP 52000 by default for PROGRAM channel
5
)
Talkback Port
(UDP 52001 by default for TALKBACK channel
6
)
Timeout
(the connection timeout is 5s by default
7
)
5
Usually this number is more important for the receiving Quantum since the local router must
provide “port forward” on this port number for the Quantum. This port must be “forwarded” for
TCP & UDP. Please contact your IT specialist or network manager for details about this
procedure.
6
Preceding remark is applicable for the Talkback channel too.
7
This parameter applies for the detection of interrupted streaming connections. After a streaming
connection has been involuntary interrupted, Quantum retries indefinitely re-connections to the
destination.
To Next Page
Loading...
