Prodys QUANTUM LITE - User Manual

January 2019
Rev. 1.6
Last valid version: 2.2.2

Summary

Basic Management

III.3 Control Web Interface

Explains remote control of Quantum codecs via web browser.

III.4 Setting the IP parameters

Details setting IP parameters for wired and wireless interfaces.

III.6 Establishing the IP connection

Steps to establish an IP connection, including status indicators.

III.7 Setting a profile

User-configurable parameters for transmission and reception.

III.8 Monitoring the status of the connection

Real-time monitoring of link performance and network parameters.

Functional Description

IV.1 Control Area. Communications

IV.2 Configuration Menu

Accessing main configuration options like Audio, Streaming, Interfaces, etc.

IV.2.1.1. Streaming options menu

Menu for switching streaming network and adapting parameters.

IV.2.1.2. Network selection (Net)

IV.2.1.11. Connection Profiles

IV.2.2 Interfaces options menu

IV.2.2.1. LAN configuration

Details LAN1 and LAN2 configuration for control and streaming.

IV.2.2.4. Wi-Fi configuration

IV.2.2.5. 3 G;4 G network’s configuration

Configuring 3G/4G modems with data access settings for providers.

IV.3 Preset menu

IV.4 Monitor menu

Checking real-time parameters for streaming operation and network performance.

IV.5 Alarm menu

IV.6 File menu

IV.6.6 Network share

Audio Encoding Algorithms

Updating the Firmware

Firmware update steps

IP address configuration for update

ProdysFlashPlus application usage

Detailed Ports Description

VII.2 Streaming Ports

Prodys QUANTUM LITE Specifications

General

Operating Voltage	12 V DC
Audio coding	G.711, G.722, OPUS
Protocols	SIP, RTP
Interfaces	USB
Microphone Type	Condenser
Signal-to-Noise Ratio	70 dB
Cable Length	2 meters
Connector	RJ45, USB
Sensitivity	-38 dBV/Pa