Need help?Do you have a question about the PROEL MQ6 and is the answer not in the manual?
Combo connector for balanced microphone XLR or balanced/unbalanced line level JACK input.
Adjusts input sensitivity for mic and line signals, providing 0-40 dB gain for XLR and 20 dB attenuation to 20 dB gain for jack.
Controls output level before MAIN MIX and HEADPHONE outputs; '0' indicates +4dBu nominal level.
Activates/deactivates phantom power for condenser microphones on MIC inputs.
Balanced line-level signal for connection to amplifiers or speakers.
Input for the external power supply unit.
Combo connector for balanced microphone XLR or balanced/unbalanced line level JACK input.
Adjusts input sensitivity for mic and line signals, providing 0-40 dB gain for XLR and 20 dB attenuation to 20 dB gain for jack.
Controls output level before MAIN MIX and HEADPHONE outputs; '0' indicates +4dBu nominal level.
Activates/deactivates phantom power for condenser microphones on MIC inputs.
Balanced line-level signal for connection to amplifiers or speakers.
Input for the external power supply unit.
General| Channels | 6 |
|---|---|
| Phantom Power | Yes |
| EQ | 2-band |
| EQ per Channel | Yes |
| Aux Send | 1 |
| Microphone Inputs | 2 |
| Monitor Out | 1 x 1/4" TRS |
| Headphone Output | 1 x 1/4" |
| Power Supply | External |
To Next Page