EasyManua.ls Logo

PROF DC 16E - Before Use

Default Icon
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Before use
Caution!
Always keep the unit in vertical position.
Leave the unit to stand for one hour before connecting to the mains
supply after transport or when it has been tilted (e.g. during cleaning).
Keep all foreign objects away from the air intake or output openings.
The mains supply must conform to the specification shown on the
rating plate at the back of the unit.
If the supply cord is damaged, it must be replaced by an approved
service representative or a similar qualified person in order to avoid a
hazard.
Never use the plug to start and stop the unit. Always use switch on the
control panel.
Before moving the unit, first switch off, then unplug and empty the
water tank.
Don't use bug sprays or other flammable cleaners on the unit.
Never pour or spray water over the unit.
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS
(INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR
MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND
KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A
PERSON RESPONSIBLE FOR THEIR SAFETY. CHILDREN SHOULD
BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH
APPLIANCE.
IMPORTANT!
Do not use this unit at ambient temperatures below 5
o
C, to prevent the
possibility of a heavily ice up evaporating coil.