To Next Page
K
Katelyn ThomasAug 16, 2025
What to do if the indicator lamp flashes on my Profi Cook PC-EWB 1007 Ice Maker?
- LLisa RoblesAug 16, 2025
If the indicator lamp flashes, it means you need to refill the water for making ice cubes.
What to do if the indicator lamp flashes on my Profi Cook PC-EWB 1007 Ice Maker?
If the indicator lamp flashes, it means you need to refill the water for making ice cubes.
Why is my Profi Cook Ice Maker not working?
Your Profi Cook Ice Maker might not be working due to several reasons: * The appliance is not turned on. Use the on/off switch to turn it on. * There is no power supply from the socket. Test the socket with another appliance. * The mains plug is not correctly plugged in. Plug in the mains plug correctly. * The main circuit breaker is broken. Check the main circuit breaker. * The appliance is faulty. Contact a specialist.
What to do if the symbol flashes on Profi Cook PC-EWB 1007?
If the symbol flashes, it indicates that the water tray is blocked by oversized ice cubes. To resolve this: 1. Turn off the appliance using the on/off switch. 2. Wait until the ice cubes loosen. 3. Switch the appliance on again and restart it.
Why are the ice cubes from my Profi Cook PC-EWB 1007 too large and stick together?
If the ice cubes are too large and stick together, it's likely due to the water temperature or ambient temperature being too low. Stop ice cube production, drain off some water, and refill with lukewarm water (max. 35°C).
Why is the compressor on my Profi Cook PC-EWB 1007 Ice Maker so noisy?
A noisy compressor could be due to a mains power supply that is too low. Turn the appliance off and check the mains power supply.
Why my Profi Cook PC-EWB 1007 Ice Maker has no function?
If your Profi Cook Ice Maker isn't working, first, ensure it's switched on using the on/off switch. Check the socket with another appliance and make sure the mains plug is correctly inserted. Also, verify the main circuit breaker. If none of these steps work, the appliance might be faulty.
Why Profi Cook Ice Maker produces ice cubes that are too large?
If the ice cubes from your Profi Cook Ice Maker are too large and stick together, it could be due to low water or ambient temperature. Stop ice cube production, drain some water, and refill with lukewarm water (max. 35 °C).
Why Profi Cook PC-EWB 1007 produces ice cubes that are too small?
If the ice cubes from your Profi Cook Ice Maker are too small, it could be due to a high surrounding temperature. Place the appliance in a cooler location and ensure adequate air circulation. Also, if the water temperature is too high, stop ice production, drain some water, and refill with cold water (max. 20 °C). Smaller ice cubes are normal during the first production cycles.
What to do if the indicator lamp flashes on Profi Cook PC-EWB 1007?
If the indicator lamp flashes on your Profi Cook Ice Maker, it indicates that you need to refill the water. Please, refill water as described in 'Making Ice Cubes' section.
Why Profi Cook PC-EWB 1007 Ice Maker compressor is noisy?
If the compressor of your Profi Cook Ice Maker is noisy, it may be due to a low mains power supply. Turn off the appliance and check the mains power supply.
Explains symbols used for safety and important information within the manual.
Warns against using water with additives to prevent appliance contamination.
Caution against blocking ventilation openings to ensure proper operation.
Advises a waiting period after transport or initial use for refrigerant settling.
Lists all components included with the ice cube maker.
Provides instructions on how to safely remove and check the appliance from its packaging.
Visual identification of all parts of the ice cube maker.
Explanation of the control panel buttons and display meanings.
Guidance on placing the appliance for optimal performance and safety.
Instructions for safely connecting the appliance to the power supply.
How to interact with the appliance's touch control interface.
Steps for setting the current time and programming the timer functions.
Detailed instructions on how to produce ice cubes, including water filling.
Procedure for manually halting the ice making process.
Meaning of the indicator when the ice cube container is full.
Meaning of the indicator when the water tank needs refilling.
Instructions for cleaning the removable ice cube container.
Guidance on cleaning the exterior and interior surfaces.
Procedure for draining water, especially for longer storage.
Addresses issues where the appliance does not power on.
Troubleshooting steps for unusual compressor noise.
Diagnosing problems indicated by the flashing indicator lamp.
Solutions for producing small ice cubes.
Troubleshooting for ice cubes sticking together or being too large.
Provides technical specifications like model number, voltage, and power input.
Explains the symbol for proper disposal of electrical appliances.
General| Type | Ice Maker |
|---|---|
| Model | PC-EWB 1007 |
| Ice Production Capacity | 10-15 kg/24h |
| Ice Cube Shape | Bullet |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Warning Signal | Yes |
| Water Tank Capacity | 1.8 L |
| Ice Storage Capacity | 0.6 kg |
| Ice Cube Size | Small |
| Power Consumption | 150 W |
