To Next PageTo Next PageWhat to do if the icon lights up on Profi Cook PC-EWB 1187 Ice Maker?
If the icon lights up on your Profi Cook Ice Maker, it's likely that oversized ice cubes are blocking the water tray. To resolve this, wait for the ice cubes to loosen, then switch the appliance on again using the ON/OFF button to restart it.
Why are the ice cubes too small in my Profi Cook Ice Maker?
If your Profi Cook Ice Maker is producing ice cubes that are too small, this may be due to several reasons. The surrounding temperature might be too high. Try placing the appliance in a cooler location, ensuring adequate air circulation. The water temperature could also be too high; in this case, stop ice production and refill with cold water (max. 20 °C). Also, check that you have selected an appropriate ice cube size (M or L) using the MODE button. Note that smaller ice cubes are normal during the first few production cycles.
Why are ice cubes too large and stick together in Profi Cook Ice Maker?
If your Profi Cook Ice Maker is making ice cubes that are too large and sticking together, the water or ambient temperature might be too low. Stop the ice cube production, drain some water, and refill the water tank with lukewarm water (max. 35 °C).
What to do if indicator lamp flashes on Profi Cook Ice Maker?
If the indicator lamp on your Profi Cook Ice Maker is flashing, it usually means that the water needs to be refilled. Please refill the water according to the 'Making Ice Cubes' instructions.
General| Type | Ice Maker |
|---|---|
| Model | PC-EWB 1187 |
| Ice cube production per 24h | 12 kg |
| Warning signal | Yes |
| Power Consumption | 150 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Water tank capacity | 2.2 L |
| Ice cube shape | Bullet |
Provides critical safety warnings and precautions for using the appliance.
Steps for connecting the appliance to the power supply.
Detailed steps for initiating and performing ice production.
Procedure for manually interrupting or stopping the ice-making process.
Explanation of indicator lamps for ice full and water refill status.
Crucial warnings and cautions before and during cleaning procedures.
Common problems and their solutions for the ice cube maker.
