To Next PageTo Next PageWhat to do if ICE FULL and ADD WATER lights are on at the same time on Profi Cook Ice Maker?
If the ICE FULL and ADD WATER indicator lamps light up simultaneously on your Profi Cook Ice Maker, it could mean the water tank is blocked by ice cubes. Disconnect the ice maker from the power supply, remove the ice cubes from the automatic scoop, then reconnect it and press the ON/OFF button.
Why don't the indicator lamps turn on in my Profi Cook PC-EWB 1079 Ice Maker?
If the indicator lamps on your Profi Cook Ice Maker aren't turning on, ensure the appliance is connected to a functioning power supply. Also, check the fuse. If problems persist, the appliance may be defective.
What to do if the ADD WATER light is flashing on my Profi Cook Ice Maker?
If the ADD WATER indicator lamp is flashing on your Profi Cook Ice Maker, it means the water level is too low. Refill the water by following the instructions in the 'Making Ice Cubes' section.
General| Type | Ice Maker |
|---|---|
| Model | PC-EWB 1079 |
| Ice Cube Shape | Bullet |
| Power Consumption | 150 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Warning signal | Yes |
| Ice Production | 10-15 kg/24h |
Explains safety symbols like WARNING, CAUTION, and NOTE for user guidance.
Provides essential advice on reading instructions, keeping warranty, and sharing the manual.
Guides on correctly connecting the appliance to the electrical power supply.
Details the process of initiating and producing ice cubes.
Explains how to manually halt the ice making process.
Describes the function of the indicator lamp when the ice container is full.
Explains the indicator lamp function when the water tank is nearly empty.
Instructions for cleaning the removable ice cube container.
Guidance on cleaning the external and internal surfaces of the appliance.
Procedure for draining water when the appliance is not in use.
Explains the symbol for proper disposal of electrical equipment.
