Proficook PC-FW 1003 - Special Safety Instructions and Usage; Special safety instructions for this unit; Description of Parts; Supplied parts; Intended use

36
insufficient knowledge and/or experience, un-
less they are supervised by an individual who
is responsible for their safety or have received
instructions on how to use the device.
• Childrenshouldbesupervisedatalltimesin
order to ensure that they do not play with the
device.
Special safety instructions
for this unit
WARNING: Risk of injury!
• Beforereplacementofaccessoriesorad-
ditional parts which move during operation, the
device must be switched off and cut off from
the mains.
• Donottouchmovingparts.
• Beforechangingaccessories,waituntilthe
knife has come to standstill.
• Beforeswitchingon,makesurethatthe
accessories attachment has been installed
correctly and is seated securely.
• Alwaysusethesuppliedtamper.Neverinsert
your fingers or tools into the filling neck!
• Handletheknifewiththenecessarycarewhen
taking out and cleaning it!
• Donotbreakupharditemssuchasbonesor
shells.
• Donotmanipulatesafetyswitches.
Description of Parts / Supplied parts
1 Filling tray
2 Motor
3 Switch / /R(On/Off/reverses)
4 Screw
5 Scroll housing
6 Pusher
Illustrations A to D on the last page:
7 scroll
8 Knife
9 3 Sieve (fine, medium, coarse)
10 Plug
11 Sausage attachment
12 2-part “Kebbe” attachment
13 2-part cookie attachment
14 Rail for biscuits
Intended use
This appliance serves
• Cutupfoodstuff.
• Youcanshapenoodlesordoughwithdifferent
attachments.
It is exclusively intended for this purpose and may
be only used appropriately.
It may only be used in the manner described in
these operating instructions.
Youmaynotusetheapplianceforcommercial
purposes.
Use for any other purpose is considered improper
and not for the intended purpose and can result in
damage to property and personal injury.
The manufacturer shall not be liable for damages
caused by not intended use.
Unpacking the appliance
1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
 NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under “Cleaning”.
Preparation
Please see the overviews on pages 3 and 74.
1. Openthextureforthespiralhousingwiththe
screw (4) on the device.
2. Place the spiral housing (5) with the filler neck
facing upwards into the spiral drive and turn the
screw clockwise until it is closed.
3. Place the filling tray on to the filler neck in such
a way that the fixture for the tray is above the
motor block.