a. Blade attachment hardware
(19 screws for attaching blade arms to the
fan motor assembly)
b. Blade attachment hardware
(19 screws for attaching blades to blade
arms)
c. Blade attachment hardware
(37 screws for attaching blade decorative
bars to blades)
d. Electrical hardware and Balancing kit
(3 plastic wire connectors, blade balancing
kit )
7. Blades (6)
8. Blade Arms (6)
9. Light Kit Pan
10. Light Kit Fitter Assembly
11. Shatter-resistant Shade with Trim Ring
12. Transmitter and Receiver
1. Mounting Bracket (inside canopy)
2. 6” Ball/Downrod Assembly (hanger pin
and locking pin pre-attached)
3. Canopy with Canopy Ring (attached)
4. Decorative Motor Collar Cover
5. Fan Motor Assembly
6. Blade Decorative Bar (6)
2. Unpacking Your Fan
Unpack your fan and check the contents. You should have the following items:
5
1
2
3
4
7
6
8
9
11
12
10
d
a
b
c
To Next Page
Loading...
