progressive automations flt-05 User Manual (English)

Other manuals for progressive automations flt-05

Questions and Answers:

S
Sharon BenitezAug 14, 2025
What to do if Progressive Automations Lifting Systems table lift does not move?
- M
  matthewriosAug 14, 2025
  If your Progressive Automations Lifting Systems table lift isn't moving when you press the motion control buttons, it could be due to a couple of reasons. First, check if you've reached a limit switch. If so, follow the 'Setting Limit Switches' instructions to remove the programmed limit, or move the system in the opposite direction if you've reached the maximum or minimum height. Secondly, there may be a connection issue. Try disconnecting and reconnecting the Lifting Columns, Control Box, AC Power, and Remote.
J
James JeffersonAug 17, 2025
What to do if Progressive Automations Lifting Systems table lift stops abruptly?
- C
  Charles EdwardsAug 17, 2025
  If your Progressive Automations Lifting Systems table lift stops suddenly, check for any obstructions in its path. If the problem continues, initiate the Reset Procedure.
T
Tom HoltAug 20, 2025
What does Error Code E01 mean on Progressive Automations Lifting Systems?
- U
  udavisAug 20, 2025
  Error Code E01 on your Progressive Automations Lifting Systems indicates that the total weight capacity of the table lift may have been exceeded, or there might be an obstacle obstructing movement. Press any key until the remote displays RST, then initiate the Reset Procedure. If the issue persists, disconnect and reconnect all lifting columns, including the main power, and repeat the Reset Procedure.

progressive automations flt-05 Specifications

General

Model	FLT-05
Type	Linear Actuator
Category	Indoor Furnishing
Massage	No
USB Ports	No
Voltage	12V DC
Current	5A
Duty Cycle	20%
Protection	IP54
Adjustability	Adjustable
Operating Temperature	-26°C to +65°C
Material	Aluminum