4.5 Instructions for use
Follow these steps to ensure proper operation during a treatment:
Clean the device surface with a soft
wet cloth. Make sure your face is clean,
dry and wiped free of any oil or
cosmetics before using the device.
1
Wear the device as wearing eye glasses
and adjust the position for a
comfortable t. Make sure that the eye
shield completely covers your eyes for
preventing LED lights from entering
your eyes.
Note: Use the device after taking o your
glasses.
2
Press and hold the Power button for 1
second on the left side of the temples
to turn on the device.
3
The default setting of the mask is
Mode 1 (Red Light + Infrared). Press
again the Power button to select the
desired mode for the mask.
Mode 1 (Red Light + Infrared):
Penetrates the surface of your skin to
reduce wrinkles.
Mode 2 (Blue Light + Red Light): Treats
your skin by targeting bacteria that can
cause acne.
4
12
To Next Page
Loading...
