Project Source 67129W-1001

Questions and Answers

A
Anthony RoweAug 11, 2025
Why is the water pressure low in my Project Source Kitchen & Bath Fixture?
- X
  xpopeAug 11, 2025
  Low water pressure in your Project Source Kitchen & Bath Fixture can be due to a clogged connector or aerator. To resolve this: 1. Turn off the water supply and disconnect the connector/aerator. 2. Unscrew the connector / aerator and clean it under running water. 3. Screw the connector / aerator back on. 4. Test the water flow. If the pressure remains low, consider replacing the connector / aerator.
T
teresaduarteAug 17, 2025
What to do if the aerator leaks in my Project Source Kitchen & Bath Fixture?
- E
  Eileen GibsonAug 17, 2025
  If your Project Source Kitchen & Bath Fixture aerator leaks or has an inconsistent water flow, it could be due to a dirty or mis-fitted aerator, or a clogged cartridge. You can: 1. Remove the aerator and check for debris in the aerator screens. 2. Remove the cartridge and check for debris. 3. Ensure the aerator is properly installed.
M
Michael BraunAug 23, 2025
How to fix leaks under the handle of a Project Source Kitchen & Bath Fixture?
- E
  Elizabeth PowellAug 23, 2025
  If you find leaks underneath the handle of your Project Source Kitchen & Bath Fixture, it's likely that the bonnet nut has come loose or the O-ring on the cartridge is dirty or damaged. Try tightening the bonnet nut. If the leak persists, clean or replace the O-ring.
A
Amber RobinsonAug 29, 2025
How to fix leaks underneath the handle of Project Source 67129W-1001 Kitchen & Bath Fixtures?
- R
  Rhonda TaylorAug 29, 2025
  If you notice leaks underneath the handle of your Project Source Kitchen & Bath Fixture, it could be that the bonnet nut has come loose or the O-ring on the cartridge is dirty or damaged. Try tightening the bonnet nut first. If the leak persists, clean or replace the O-ring.
M
Michael BarreraSep 4, 2025
What to do if the aerator leaks or has an inconsistent water flow pattern in Project Source Kitchen & Bath Fixtures?
- U
  uirwinSep 4, 2025
  If the aerator of your Project Source Kitchen & Bath Fixture is leaking or has an inconsistent water flow, the aerator might be dirty or mis-fitted. Remove the aerator and check for any debris in the aerator screens. Alternatively, the cartridge may be clogged. Remove the cartridge and check for debris. Make sure to properly install the aerator after cleaning.