To Next PageTo Next Page
Need help?Do you have a question about the Project Source 0921987 and is the answer not in the manual?
Lists and illustrates the hardware components included with the faucet, such as lock nuts, washers, and bolts.
Details on checking parts, assembly time, required tools, and initial installation steps before starting.
Technical details including flow rate, standards compliance, finishes, cartridge type, lead content, and weight.
Instructions for installing the faucet with an optional deckplate for a 3-hole sink configuration.
Steps for securing the faucet body from underneath the sink using washers and lock nuts with hex bolts.
Guidance on connecting the spray hose to the quick connector and attaching water supply lines to the faucet.
Procedure to flush debris from water lines after installation by removing the spray head and checking for leaks.
Diagnosing and fixing leaks around the faucet handle, potentially due to a loose bonnet or dirty cartridge o-ring.
Troubleshooting issues where the faucet does not fully shut off, often related to the rubber valve seat.
Resolving leaks occurring around the aerator due to improper fitting, dirt, or incorrect internal part installation.
Addressing issues of reduced or absent water pressure, potentially caused by a blocked connector or hose.
General| Brand | Project Source |
|---|---|
| Model | 0921987 |
| Category | Kitchen & Bath Fixtures |
| Language | English |
