What to do if Project Source F51B0066OB aerator drips?
If water drips from the aerator of your Project Source Kitchen & Bath Fixture, the cartridge likely needs replacement. Remove the handle assembly, take out the existing cartridge and discard it. Replace it with a new cartridge, and then reassemble the faucet.
How to fix a Project Source F51B0066OB Kitchen & Bath Fixtures leak from under the handle?
If your Project Source Kitchen & Bath Fixture is leaking from under the handle, it could be due to a couple of reasons. First, the retainer nut might have come loose; try tightening it. Alternatively, the O-ring on the cartridge might be dirty or damaged; in that case, clean or replace the O-ring.
Why is the handle on my Project Source F51B0066OB Kitchen & Bath Fixtures hard to turn?
A hard-to-turn handle on your Project Source Kitchen & Bath Fixture can be caused by a couple of issues. Impurities in the water may be blocking the cartridge, or the cartridge itself cannot move smoothly, or spare parts burst. Try replacing the cartridge to resolve this.
What to do if Project Source F51B0066OB Kitchen & Bath Fixtures aerator leaks or has inconsistent water flow?
If the aerator on your Project Source Kitchen & Bath Fixture is leaking or has an inconsistent water flow pattern, the aerator might be dirty or misfitted. Unscrew the aerator to check the rubber packing or replace the aerator.
Turn off the water supply and remove the existing faucet if necessary.
Apply silicone sealant around the faucet base and install it through the sink top.
Secure the faucet by tightening the lock nuts onto the faucet body.
General| Brand | Project Source |
|---|---|
| Model Number | F51B0066OB |
| Finish | Oil-Rubbed Bronze |
| Number of Handles | 1 |
| Installation Type | Deck Mount |
| Valve Type | Ceramic Disc |
| Flow Rate | 1.8 GPM |
| Aerator | Yes |
| ADA Compliant | Yes |
| Warranty | Limited Lifetime |
| Material | Metal |
To Next Page
