EasyManua.ls Logo

Project Source 1233226 - User Manual

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Serial Number
PH1936
Purchase Date
ATTACH YOUR RECEIPT HERE
PROJECT SOURCE and PROJECT SOURCE &
Design are trademarks or registered trademarks
of LF, LLC. All rights reserved.
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday.
Español p. 11
ITEM #1233226
#1233227
#1233228
#1328816
BATHROOM FAUCET
MODEL #F51B0066OB
#F51B0066CP
#F51B0066NP
#F51B0066YP

Questions and Answers

  • R
    Rebecca Duran MDAug 10, 2025
    What to do if Project Source 1233226 Kitchen & Bath Fixtures aerator drips?
    • B
      baxtertyroneAug 10, 2025
      If water drips from the aerator of your Project Source Kitchen & Bath Fixture, the cartridge likely needs replacement. Remove the handle assembly, take out the existing cartridge and discard it. Replace it with a new cartridge, and then reassemble the faucet.
  • C
    coltontorresAug 17, 2025
    How to fix a Project Source 1233226 Kitchen & Bath Fixtures leak from under the handle?
    • J
      John HodgesAug 17, 2025
      If your Project Source Kitchen & Bath Fixture is leaking from under the handle, it could be due to a couple of reasons. First, the retainer nut might have come loose; try tightening it. Alternatively, the O-ring on the cartridge might be dirty or damaged; in that case, clean or replace the O-ring.
  • M
    Matthew HallAug 25, 2025
    Why is the handle on my Project Source 1233226 hard to turn?
    • J
      Jason DelgadoAug 25, 2025
      A hard-to-turn handle on your Project Source Kitchen & Bath Fixture can be caused by a couple of issues. Impurities in the water may be blocking the cartridge, or the cartridge itself cannot move smoothly, or spare parts burst. Try replacing the cartridge to resolve this.
  • J
    John HernandezSep 1, 2025
    What to do if Project Source Kitchen & Bath Fixtures aerator leaks or has inconsistent water flow?
    • C
      cannonkristinaSep 1, 2025
      If the aerator on your Project Source Kitchen & Bath Fixture is leaking or has an inconsistent water flow pattern, the aerator might be dirty or misfitted. Unscrew the aerator to check the rubber packing or replace the aerator.

Summary

Safety Information

Preparation and Tools

Product Warning

Assembly Instructions

Initial Steps

Turn off water supply, prepare faucet base with sealant, and install through sink.

Drain Assembly

Install Drain Body

Install drain body with washers and lock nut, ensuring ball rod opening faces rear.

Plunger Installation

Insert plunger, noting locked and unlocked modes for easy cleaning.

Lift Rod and Drain Connection

Ball Rod and Lift Rod

Connect ball rod to drain assembly and lift rod to faucet via lift rod strap.

Final Assembly and Testing

Water Supply and Flush

Turn on water supply, flush debris, and check for leaks after replacing aerator.

Care, Maintenance, and Troubleshooting

Maintenance and Troubleshooting Guide

Provides guidance on cleaning, common issues like leaks or low flow, and their solutions.

Warranty Information

Replacement Parts List

Project Source 1233226 Specifications

General IconGeneral
ADA CompliantNo
Color/Finish FamilyChrome
Handle TypeLever
Mounting LocationDeck Mount
Number of Faucet Handles2
Supply Lines IncludedYes
Valve MaterialCeramic

Related product manuals