9
ASSEMBLY INSTRUCTIONS
11
10
12. YOU’RE FINISHED – ENJOY
12
Hardware Used
GG
x 2
10. Using a phillips head screwdriver, secure the
drawer box with csk screws 1 ½” as shown in the
illustration. Be careful not to over-tighten as this
may damage the product.
105
o
Hinge
Hinge guide
11. Mount the door on the cabinet by connecting the
hinges on the door to the mounting plates on
the box. Use the hinge guide below for detailed
instructions.
If the adjustments to the door are needed,
instructions are available on page 10 of this manual.
To Next Page
Loading...
