Need help?Do you have a question about the Projecta DC20 and is the answer not in the manual?
General| Input Voltage | 240V AC |
|---|---|
| Output Voltage | 12V DC |
| Output Current | 20A |
| Battery Type | AGM, Calcium, Gel |
| Protection Features | Reverse Polarity, Over Voltage, Short Circuit |
Utilizes latest switchmode technology for lightweight, compact, high-performance charging.
Delivers faster, more powerful charge, ideal for deep cycle batteries.
Allows operation based on vehicle ignition status or continuous operation.
Details safety functions like spark-free, reverse connection, and voltage/temperature protection.
Covers easy mounting options and the informative LED display.
Details the front panel components, including the LED display and indicators.
Details the back panel components, including input/output terminals and mounting extrusions.
Provides guidance on securely mounting the DC20 unit.
Details the correct procedure for connecting input, output, and ignition terminals.
Illustrates two methods for connecting the ignition terminal.
Shows a comprehensive diagram of a typical installation setup.
Explains the meaning of each LED indicator for status and fault.
Provides step-by-step instructions for replacing input and output fuses.
Addresses the unit's resistance to dust and water.
Explains why positive battery cables require fusing.
Confirms safety and compatibility with modern electronic vehicles.
How to determine if the battery is charged and troubleshooting LED issues.
Explains reasons for the 'Fully Charged' LED illuminating immediately.
Defines surface charge and its effect on charging indication.
Describes how a faulty cell can affect battery charging.
Troubleshooting why the charger might not provide output power.
To Next Page
