Need help?Do you have a question about the Projecta IC3500 and is the answer not in the manual?
General| Input Voltage | 220-240VAC |
|---|---|
| Frequency | 50Hz |
| Output Voltage | 12V |
| Battery Type | AGM, Gel |
| Protection Features | Reverse polarity, over voltage, short circuit, over temperature |
Essential safety guidelines and warnings for using the battery charger and handling batteries.
Breaks down sulphation in batteries using high-frequency pulses.
Gently introduces power to the battery to protect it and increase lifespan.
Charges the battery at maximum rate (constant current) to about 80%.
Charges battery to 100% by adjusting charge rate for maximum power absorption.
Mode for Calcium batteries, requires equalisation charge for full electrolyte reading.
Procedure for checking and topping up battery electrolyte levels before charging.
Connecting the charger leads to a battery that is not installed in a vehicle.
Connecting the charger to the 240V mains power socket and turning it on.
Guidance on setting the charge rate based on battery size using provided tables.
Selecting the correct charging profile based on the battery's chemistry type.
Details on normal charging, LCD display during stages, and fully charged indication.
Procedure for safely disconnecting the charger from the battery and mains power.
Procedure to restore deeply discharged batteries using the recondition mode.
Explanation of error codes displayed on the LCD and power LED, with remedies.
Technical specifications for different Projecta Intelli-Charge charger models.
To Next Page
