Projecta IDC25X User Manual

25A, LINBUS, MULTI-CHEMISTRY
INTELLI-CHARGE
DC/SOLAR BATTERY CHARGER
P/No. IDC25X
WARNING: This is a HIGH current device.
It is the installer’s responsibility to ensure all cabling meets the
requirements as stipulated on page 6 of this installation manual to ensure a
SAFE installation, particularly when upgrading with a higher capacity unit.
Failure to comply with the supplied installation instructions will void the warranty.

Projecta IDC25X Specifications

General

Input Voltage	9-32V DC
Output Voltage	12V DC
Charging Current	25A
Waterproof Rating	IP67
Battery Type	AGM, Calcium, Gel
Protection Features	Reverse Polarity, Over Temperature
Charging Stages	3 Stage

Summary

Important Safety Information

Warnings

Safety precautions and potential hazards during charging.

Features

Overview of the product's key capabilities and benefits.

Multi-Chemistry Charging

Parallel Charging

Ability to wire units in parallel for increased charging current.

Future Proof

Firmware updatability via Bluetooth for future features.

Solar MPPT

Utilizes MPPT technology to maximize solar power generation.

Protective Features

Details on reverse connection, over/under voltage, and over temperature protection.

Specifications

Product Overview

Installation

Mounting

Guidance on mounting the unit for optimal performance and durability.

Wiring

Recommendations for cable sizing and connection procedures.

Wiring Instruction Guides

Full System With Intelli-IQ Configuration

Wiring diagram for a complete system setup with Intelli-IQ.

Full System Configuration

Wiring diagram for a standard full system setup.

Alternator/Starter Input Only Configuration

Wiring diagram for systems using only the alternator input.

Solar & Auxiliary Battery Input Configuration

Wiring diagram for systems using solar and auxiliary battery inputs.

How to Read LED Indicators

LED Charge Indicators

Explanation of LED status lights for charging and input status.

LED Battery Charge Status Indicators

How to Select Battery Chemistry

Procedure for selecting the correct charge setting for the auxiliary battery.

Output Override

Method to initiate charging for heavily discharged auxiliary batteries.

Frequently Asked Questions

Warranty Statement