Projecta IC3500 - Initiating Recondition Mode; Recondition Mode Procedure

17
INITIATING RECONDITION MODE
Thereconditionmodecanrestorebatteriesfromadeeplydischargedstateby
equalisingthecells(equalisationcharge)ensuringtheyareoperatingatfullcapacity.
Areconditionchargeshouldbeperformedperiodicallytooptimisethebattery’shealth
and performance.
STEP 1
FollowSTEPS1to6ofthe“ChargingInstructions”ofthisbooklet.
Ensurethebatteryisremovedfromthevehicletopreventthebattery’selectrolyte
fromspillingoveranddamagingthecarorenginebay.
STEP 2 – PRESS THE RECONDITION BUTTON
Thechargerwillbeinthismodefor4hours.DuringreconditiontheLCDscreenwill
displayrapidhorizontallines.Uponcompletionoftherecondition,thechargerwill
proceed to carry out a normal charge on the battery.
STEP 3
FollowSTEPS7to9oftheChargingInstructionsofthisbooklet.
LOCKING THE REMOTE CONTROL
LockingtheremotecontrolwilldisabletheCHARGE,BATTYPE&RECONkeysfrom
use.Thisfunctionisidealforhirevehiclesetcasitpreventsthechargerssettingsfrom
beingalteredifthekeysaretouched.WhenlockedtheVOLT/AMPkeywillstillworkto
displaythevoltsoramps.
Tolock;pressandholdthe‘CHARGE’and‘BATTYPE’keysfor3secondsuntilyouhear
abeep.Thisindicatesthekeysarenowlocked.
Tounlock;pressandholdand‘CHARGE’and‘BATTYPE’keysfor3secondsuntilyou
hearanotherbeep.Thisindicatesthekeysarenowunlocked.