EasyManuals Logo

Projecta INTELLI-START User Manual

Projecta INTELLI-START
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for
future reference.
WARNINGS
This unit has been designed for 12V vehicles only.
Risk of explosive gas. Working in the vicinity of car batteries can be dangerous.
Batteries release explosive gases during normal operation, charging and while
jumpstarting a battery. Before using this Jumpstarter, read and follow the instructions
carefully. Follow all manufacturer’s instructions and warnings of the vehicle’s battery
and other equipment being used.
Jumpstart 12V automotive lead acid batteries only. Do not use to jumpstart dry cell
batteries commonly found in household appliances. These batteries may burst and
cause injury and/or property damage.
Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near
the battery.
Do not allow metal to come in contact with the battery posts. It may spark or
short-circuit the battery and cause an explosion/fire.
Remove rings, bracelets, necklaces, and watches when working at the vehicle and/or
jumpstarting a vehicle.
The Jumpstarter contains a sealed non-spillable Lithium Iron Phosphate battery
(LiFePO
4
). This must be disposed of properly.
Ensure correct polarity when connecting clamps to vehicle.
The Jumpstarter is not designed to be left outside for extended periods of time or
submerged in water.
Do not store the Jumpstarter in temperatures above 60˚C or below -10˚C, as this can
affect the health of the battery.
Always wear eye protection when operating the Jumpstarter.
Although the Jumpstarter has been designed to protect the battery, do not drop the
Jumpstarter or try and pierce it in anyway. This can result in an explosion/fire.
If the Jumpstarter is physically damaged in any way, it should not be used.
Not intended for people (including children) with reduced physical or mental
capability.
Do not try and charge via the USB output as this will damage the Jumpstarter and
the USB output.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Projecta INTELLI-START and is the answer not in the manual?

Projecta INTELLI-START Specifications

General IconGeneral
System TypeRemote Starter
Operating Voltage12V DC
InstallationProfessional installation recommended
Timer ModeYes
Temperature ModeYes
Battery ProtectionYes
Remote RangeUp to 1000 meters

Related product manuals