Projecta PC800 User Manual

PRO-CHARGE
6 STAGE SWITCHMODE
BATTERY CHARGER
P/No.s PC400, PC800, PC1600, PC2100

Projecta PC800 Specifications

General

Output Voltage	12VDC
Input Voltage	220-240V AC
Output Current	8A
Battery Type	Lead Acid (AGM, Gel, Wet)
Protection Features	Reverse polarity, short circuit, overheat, overcharge

Summary

Important Safety Information

General Safety Precautions

Crucial safety guidelines for battery charging, including ventilation, proper connection, and avoiding hazards.

6-Stage Automatic Charging

Explanation of Charging Stages

Details the 6 stages: Rejuvenation, Soft Start, Bulk, Absorption, Battery Test, and Float for optimal battery care.

Features

Product Features Overview

LED Charge Indicators

Interpreting LED Signals

Charging Instructions

Check Electrolyte Level

Connect Battery Out of Vehicle

Connect Battery In Vehicle

Permanent Hard Wiring Connection

Charging Process

Connect to Mains and Set Parameters

Steps for connecting to mains power, setting charge rate, battery type, and initiating the charging phase.

Disconnection and Rejuvenation

Disconnecting the Charger

Initiating Rejuvenation Mode

Steps to start and manage the 24-hour battery rejuvenation process for restoring performance.

Faults & Errors

Troubleshooting Fault Signals

Explains fault signals indicated by LEDs and provides corresponding remedies for common issues.