OPERATING INSTRUCTIONS
To operate the inverter turn the inverter On/Off switch to ON (PW150 & PW350) or press the
power button (PW600, PW900 & PW1800). The inverter will beep momentarily while it carries out
a brief self-analysis before supplying power to the AC socket (only on PW150 & PW350). To turn
off, turn the inverter On/Off switch to OFF (PW150 & PW350) or press the power button again
(PW600, PW900 and PW1800).
To help prevent the inverter being overloaded:
1. Ensure appliances are turned off before turning the inverter on.
2. If multiple appliances are being run, turn on one at a time.
MOUNTING INSTRUCTIONS
Pro-Wave inverters are designed for indoor, out of weather use only. During operation, the inverter
should be in a dry, cool and well-ventilated area as close to the batteries as possible, but not in
the same compartment as the batteries. Ensure the inverter is away from flammable materials
and fumes.
The inverter base plate includes a mounting flange for easy mounting (excluding PW150).
If permanently fixed, the inverter should be mounted to a suitable horizontal or vertical panel, with
at least 10cm clearance from the end plates to provide adequate ventilation for the cooling fan.
Part No. Inverter Dimensions
Length Width Height
PW150 196mm 126mm 67mm
PW350 242mm 126mm 67mm
PW600 339mm 190mm 81mm
PW900 388mm 242mm 96mm
PW1800 391mm 266mm 116mm
6
6.5mm mounting hole