Projecta SC300D User Manual

1 1
P/No. SC300D
SOLAR CHARGE REMOTE

Projecta SC300D Specifications

General

Continuous Power	300W
Peak Power	600W
Input Voltage	12V DC
Output Voltage	230V AC
USB Output	5V/2.1A
Output Frequency	50Hz
Waveform	Modified Sinewave
Protection Features	Overload, Short Circuit
Cooling	Fan Cooled

Summary

IMPORTANT SAFETY INSTRUCTIONS

GENERAL SAFETY INFORMATION

Read all instructions and cautions before installation.

INSTALLATION

Surface Mount Installation

Step-by-step guide for surface mounting the unit.

Flush Mount Installation

Steps for flush mounting the remote control unit.

OPERATION

Buttons

Schematic Operation Diagram

Illustrates the navigation flow between menus.

Main Menu Options

Lists the primary menu items available for selection.

Real-time monitoring

Battery Status Monitoring

PV and Controller Information

Load Status and Control

Test operation

Load Switch Test

Control parameter

Battery Parameters

Covers battery type, capacity, and temperature compensation settings.

Voltage Control Parameters

Details over/under voltage, charge/discharge limits.

Charging Mode Parameters

Configuration for boost, float, and equalize charging.

Timing Parameters

Battery voltage parameters

Voltage Settings Table

Specific voltage parameters for different battery types.

Voltage Setting Guidelines

Crucial rules for setting voltage parameters correctly.

Load setting

Manual Control

Light ON/OFF

Light ON+Timer Details

Time Control Details

Device parameter

Device Identification and Settings

Device password

Password Management

Changing the device password for access.

Charge mode

Charge Mode Selection

Factory reset

Factory Reset Procedure

Restoring default parameters and password.

Failure information

Viewing Failure Messages