USER GUIDE SVGA LCD PROJECTOR
26
9 CEILING MOUNTING
The projector is prepared for ceiling mounting. As opposed to desktop use
(most tables are approx. 80 cm tall, are flat and have a hard surface finish),
ceilings vary in height and material. Also considerations must be made with
respect to signal and power wiring.
9.1 SELECTING A MOUNT
Various mounting systems are available from different sources. Contact
your dealer for further details or consult vendor catalogs. Be sure that the
vendor has tested the mount with this specific projector for operational
safety. Check that the mounting brackets fit the integral mounts of the
projector (illustration below), and that the ventilation slots are not blocked.
98 mm
182 mm
To Next Page