- 22 -
This unit has a remote control. One piece of CR2032 battery is to be installed. The functions of the remote
control buttons are the same as of the buttons on the control panel. Remember to remove the plastic isolation
piece inside the battery cover when you use it for the first time.
Remote control pairing
Important: By default, the remote control in the box is paired already with the fan with which is it supplied.
However, if you lost the remote control and purchase a new one, then please pair the remote control with the
fan before use.
Steps to pair:
1. Ensure that the battery is placed inside the remote control.
2. Plug in the appliance.
3. Press the on/off button on the remote control 4 times and hold it in the position till the beep sound is heard
on the 4
th
time.
4. Once the beep sound is heard the remote control is paired with the fan.
Base mounting of the remote control
1. Drill two holes on the wall according to the holes (A) on the remote control base.
2. Insert the two plastic anchors (B) in the holes on the wall, attach the remote control base onto the plastic
anchors, and then insert the two screws (C) through the holes to fix the base.
3. Press the remote control into the base. Rotate the remote control by 90 degrees to have it fixed in place.
To Next Page
Loading...
Need help?
General
