Notes:
*The air conditioning is only suitable for indoor use, and is not
suitable for other applications.
*Follow local grid interconnection rules while installing the air
conditioning and ensure that it is properly grounded. If you have
any question on electrical installation, follow the instructions of
the manufacturer, and if necessary, ask a professional electrician
to install it.
*Place the machine in a flat and dry place and keep a distance of
above 50cm between the machine and the surrounding objects
or walls.
*After the air conditioning is installed, ensure that the power
plug is intact and firmly plugged into the power outlet, and place
the power cord orderly to prevent someone from being tripped
or pulling out the plug.
*Do not put any object into the air inlet and outlet of the air
conditioning. Keep the air inlet and outlet free from obstructions.
*When drainage pipes are installed, ensure that the drainage
pipes are properly connected, and are not distorted or bended.
* While adjusting the upper and lower wind-guide strips of the
air outlet, pluck it with hands gently to avoid damaging wind-
guide strips.
*When moving the machine, make sure that it is in an upright
position.
*The machine should stay away from gasoline, flammable gas,
stoves and other heat sources.
*Don't disassemble, overhaul and modify the machine
arbitrarily,otherwise it will cause a machine malfunction or even
To Next Page
Loading...
Need help?
General
