To Next PageTo Next PageWhy is my Prokonian Indoor Fireplace power cord getting warm?
A warm power cord during operation is usually normal. However, you should check the heater cord and plug connections. Faulty wall outlet connections or loose plugs can cause overheating. Ensure the plug fits tightly in the outlet. If the plug outlet or faceplate gets HOT, stop using the heater and have an electrician check or replace the faulty outlet.
Why is my Prokonian 64-4008-8 not producing enough heat?
If your unit isn't producing enough heat, it could be due to a power strip, surge protector, or extension cord being used. Plug the unit directly into the wall. Also, ensure the unit is located on an interior wall.
What to do if my Prokonian Indoor Fireplace stove does not turn on manually?
If your stove isn't turning on manually, there might be no incoming power from the electrical wall socket or switches. Check the circuit breakers and try moving the unit to another outlet. It could also be due to improper operation; try manually pressing the main power button on the front of the unit. A defective switch may also be the cause, requiring a replacement.
Why is the power cord of my Prokonian Indoor Fireplace getting warm?
A warm power cord can be normal during operation. Check your heater cord and plug connections. Faulty wall outlet connections or loose plugs can cause overheating. Ensure the plug fits tightly in the outlet. If the outlet or faceplate gets HOT, discontinue use and have a qualified electrician check or replace the faulty outlet.
Why is my Prokonian 64-4008-8 Indoor Fireplace heater not turning on?
If the heater isn't turning on, it could be due to improper operation. Manually press the main power button on the front of the unit. Alternatively, a defective switch or heater blower motor might be the issue, requiring replacement.
How to fix Prokonian 64-4008-8 flames that are not moving?
If the flames aren't moving, it could be a defective spinner motor, which would need to be replaced. Another possibility is that the spinner has detached from the motor. Remove the back panel and check if the spinner is correctly mounted to the motor.
What to do if my Prokonian Indoor Fireplace heater is not turning off?
If the heater isn't turning off, the thermostat switch may be defective and require replacement.
What to do if my Prokonian Indoor Fireplace has no power and the logs do not glow?
If there is no power and the logs don't glow, check that the unit is plugged into a standard 120-volt outlet and ensure the power is set to the “ON” position.
What to do if my Prokonian Indoor Fireplace is not producing enough heat?
If your unit isn't producing enough heat, ensure it's plugged directly into the wall, avoiding power strips, surge protectors, or extension cords. Also, make sure the unit is located on an interior wall.
How to brighten Prokonian 64-4008-8 flames that are not bright?
If the flames aren't bright enough, first check if this is normal operation. Turn the brightness dimmer knob until you achieve the desired brightness. If that doesn't work, the dimmer switch may be defective and require replacement.
General| Brand | Prokonian |
|---|---|
| Model | 64-4008-8 |
| Category | Indoor Fireplace |
| Language | English |
