PL-2303 Mac OS X Driver Installation Guide
Document Rev 1.4
PL2303 Mac OS X 10.6 and Above Driver Installation Guide.doc
Prolific Technology Inc. - 2 of 10 - January 16, 2015
All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages.
2. Go to the General tab and click the lock to make changes. Click to choose Allow apps downloaded
from to "Anywhere" (as shown below).
Mac OS X Driver Installation
The following steps will show how to install the PL-2303 device under Mac OS X operating system:
1. Download the Mac OS X Universal Binary driver from Prolific website.
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=229&pcid=41
2. Click on the driver installer file to run the driver installation process. Click Continue to proceed
and follow the succeeding instructions to complete the installation.
To Next Page
Loading...