Proline CB230 User Manual

125
The display flashes 3 times when plugging in the microwave oven. Then it
flashes “1:00”, indicating that the appliance is in the default standby status.
General
• Press
once to temporarily stop cooking. You can resume cooking by
pressing ,
, or press twice to cancel the cooking program.
• After the cooking time has elapsed, the oven will beep a few times.
Setting the Clock
1. In standby state, press and hold
for about 3 seconds to enter the clock
setting status.
• The hour digits will flash on the display.
2. While the hour digits are flashing, turn
to adjust the hour digits, the
input hour should be a 24-hour time value.
3. Press
to confirm. The minute digits will flash.
4. While the minute digits are flashing, turn
to adjust the minute digits.
5. Press
to confirm the setting. “:” will flash on the display.
Microwave Cooking
This function is used for cooking and heating food. Repeatedly press
and the
display will cycle to show 100P — 80P — 60P — 40P — 20P.
OPERATION
High power
100% microwave power.
Applicable for quick and thorough cooking.
Medium
High power
80% microwave power.
Applicable for medium express cooking.
Medium power
60% microwave power.
Applicable for steaming food.
Medium
Low power
40% microwave power.
Applicable for defrosting food.
Low power
20% microwave power.
Applicable for keeping warm.
CB230 IB.indd 125CB230 IB.indd 125 26/7/2022 3:35 PM26/7/2022 3:35 PM

Proline CB230 Specifications

General

Brand	Proline
Model	CB230
Category	Microwave Oven
Language	English