require. Fan speed can be set to “ ”, “ ” or
“ ” the appropriate indicators for the selected fan speed will
illuminate.
Key: ( see INSTALLATION AND OPERATION )
Press this key when adding water or ice, the outlet temperature
DROPS after 20 seconds or so and the appropriate indicator will
light. There must be water in the tank for this function to work,
otherwise an alarm will sound and this function will not work. (See
the section on Cooling).
Key:
Press this key, air will be directed from side to side, the oscillation
indicator will light.
Press this key again to turn off this function.
‡:
Set the timer to off, 1hour, 2 hours, 4 hours or 8 hours by repeatedly
pressing this key.
ION Key:
Press this key, the built-in anion generator will start to release anion,
the Ion indicator will illuminate. Press this key again to turn off this
function. (See ABOUT ION)
Key:
When the unit is being operated, this button may be used to select the
type of Air cycle from a choice of “Normal Wind”, “Natural Wind”,
and “Sleeping Wind”.
Normal Wind: (when both natural and sleeping
indicators are off)
Constant rotation with different wind speed of “ ”, “ ” and
“ ” can be set.
With the ON / SPEED key.
:
The fan operates in a cycle of Off, Hi, Medium and Low as pre-set
by the microcomputer program for 90 seconds per cycle and 6
seconds for each setting (off for 3 seconds.) High, medium or low
wind can be selected by using the ON / SPEED Key to imitate a
natural breeze.
:
Under this mode, the unit may enter computer-controlled wind mode,
in which the speed will slow down gradually according to the
change of ambient temperature, eliminating the risk of getting cold
during sleeping. The lowering procedure will be as follows:
Speed
Wind Time
Natural Hi Natural Med natural Low
Stop *
0-30 min. 30-60 min. 60min
Natural Med natural Low Stop *
30-60 min. 60min
natural Low Stop*
60min
-5-
-6-
To Next Page
Loading...
Need help?
General