EasyManuals Logo

Proline FP 612 W User Manual

Proline FP 612 W
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
GB
31
Washing Clothes
1.Open the door to load the articles into the drum.
DO NOT OVERLOAD the appliance or your laundry may not be washed properly.
Please refer to the chart below to determine the load capacity for the type of
laundry you are washing.
Load Capacity
Cotton 6 kg
Synthetic 3 kg
2.Close the door.
3.Put the detergent and, if required, softener or pre-wash detergent, in the appropriate compartments.
4.Turn the water supply on.
5.Turn the programme selection knob to select the desired programme.
6.Press and the appliance will begin the cycle.
7.When the cycle is finished, the appliance will sound.
8.Open the door and remove the laundry.
Signal function
You can use this function to turn on or off the sound made when pressing the buttons or turning the
programme selection knob.
Press and hold for about 3 seconds until a beep is heard
indicate the signal function is activated.To deactivate this function, press and hold
Prélavage
again for about 3 seconds until a beep is heard.
Prélavage
Downloaded from www.vandenborre.be

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Proline FP 612 W and is the answer not in the manual?

Proline FP 612 W Specifications

General IconGeneral
BrandProline
ModelFP 612 W
CategoryWasher
LanguageEnglish

Related product manuals