93
NOTE :
• Before washing, please make sure the washing machine is installed properly.
• Your appliance is thoroughly checked before it leaves the factory. To remove
any residual water and to neutralize potential odors, it is recommended
to clean your appliance before rst use. For this reason, start the Cotton
program at 90°C without laundry and detergent.
5. Select a programme by turning the programme selector.
WASHING
1. Turn on the tap.
3. Sort the laundry and put it into the drum.
Do not get laundry caught in the door. It can
cause damage to the door seal.
Do not put too much laundry into the drum. It
can cause excessive vibration or damage to the
appliance.
2. Plug in the appliance.
4. Add the detergent according to the amount of
laundry, degree of soiling, water hardness and
manufacturer’s instructions.
Pour liquid detergent into the appropriate
dispenser drawer and push in the appliance.
FP580DWH 1.indd 93FP580DWH 1.indd 93 19/12/2023 3:56 PM19/12/2023 3:56 PM
To Next Page
Loading...
