14
ENG
ENGLISH
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
1
Press
MENU button on the bottom of the Monitor set
to display the Menu OSD.
2
Settheoptionsbypressingthe◄or►or▼
buttons.
3
Select the "
Next Menu" button to enter the more
option settings.
4
Select
EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow (
) button.
Each option is explained below.
Menu Analog HDMI Description
Brightness ● ●
To adjust the brightness, contrast of the screen.
Contrast ● ●
Wide/Original
● ●
Wide
Switch to full screen mode according to input image signal.
Original
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio
(16:9).
Reset
● ●
Restore all factory default settings. Press the
◄
,
►
buttons to reset
immediately.
To Next Page
Loading...
General