1) When the heater is in operation, press and hold the Timer / Temperature button for about 2
seconds.
y You will hear a beep and the display will show “00h”.
2) Repeatedly press
н
or
դ
to select the desired time from 1 to 24 hours.
NOTE : You can also touch and hold
н
or
դ
for fast setting. When the required time is
displayed, release the button
н
or
դ
.
3) When the set time has elapsed, the heater will turn off.
b. Setting timer to turn off and then turn on the heater
1) When the heater is in operation, press and hold the Timer / Temperature button for about 2
seconds.
y You will hear a beep and the display will show “00h”.
2) Repeatedly press
н
or
դ
to select the desired time from 1 to 24 hours.
NOTE : You can also touch and hold
н
or
դ
for fast setting. When the required time is
displayed, release the button
н
or
դ
.
3) Press and hold the Timer / Temperature button for about 2 seconds.
y You will hear a beep and the display will show “00H”.
4) Repeatedly press
н
or
դ
to select the desired time from 1 to 24 hours.
NOTE : You can also touch and hold
н
or
դ
for fast setting. When the required time is
displayed, release the button
н
or
դ
.
5) When the timer is set, the power level indicators will flash.
6) When the set time has elapsed, the heater will turn off and then turn on.
To cancel the timer function
Press and hold the Timer / Temperature button for about 2 seconds.
Repeatedly press
н
or
դ
until the display shows “00h” or “00H”.
8. To check ambient temperature, press the Timer / Temperature button.
Anti-freeze function
In standby state, the heater will automatically turn on when the ambient temperature falls below 5°C.
EN-8
To Next Page
Loading...