101
4. If necessary, clean the heat exchanger once
every 2 months.
Do not touch the heat exchanger with your
hand!
Remove the flu from the heat exchanger using a vacuum cleaner with a dusting
brush attached. Clean the heat exchanger without applying any pressure.
5. Place the filter base back into position. Fasten the 3 locks and make sure
that they are secured.
6. Close the cover until a click is heard.
PROHP82 IB JAN2024.indd 101PROHP82 IB JAN2024.indd 101 9/1/2024 2:52 PM9/1/2024 2:52 PM
To Next Page
Loading...
