To Next Page
P
Patricia WilliamsSep 8, 2025
What does it mean when Proline I1000 signals 'Battery Low'?
- TThomas AlvarezSep 9, 2025
If your Proline UPS signals 'Battery Low' and you hear an audible alarm every second, it means the battery is almost empty.
What does it mean when Proline I1000 signals 'Battery Low'?
If your Proline UPS signals 'Battery Low' and you hear an audible alarm every second, it means the battery is almost empty.
What to do if Proline I1000 UPS shows ambient temperature high?
If your Proline UPS displays 'Ambient temperature high', it indicates that the ambient temperature is too high. Check the environment ventilation.
How to resolve 'Site Fail' error on Proline I1000 UPS?
If your Proline UPS shows a 'Site Fail' error, it means the phase and neutral conductors at the input of the UPS system are reversed. Rotate the mains power socket by 180° or correctly connect the UPS system.
What does 'Inverter Short' mean on Proline I1000?
If the Proline UPS displays 'Inverter Short', it means there is an output short circuit. Remove all loads, turn off the UPS, and check the output of the UPS and loads for any short circuits. Ensure the short circuit is removed and the UPS has no internal faults before turning it on again.
What to do if Proline I1000 shows EPO active?
If your Proline UPS shows 'EPO active', it means the EPO (Emergency Power Off) function is enabled. Plug into the EPO switch.
Important safety precautions to follow during the operation of the UPS unit.
Safety procedures for maintenance, servicing, and handling potential hazards.
Detailed guidance on connecting the UPS input power and output sockets.
Procedure for charging UPS batteries and turning on the unit.
Steps for connecting external batteries for extended runtime ('S' models).
Table of normal operating modes, warnings, and fault codes with their meanings.
Guide to identifying common UPS problems and their corresponding remedies.
General| Capacity | 1000VA / 600W |
|---|---|
| Frequency | 50/60Hz |
| Communication Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 90% non-condensing |