Using the vacuum
1. Assemble the vacuum (see Assembly section).
2. Attach the desired tool to either the vacuum body or the wand.
3. Pull the trigger to turn the vacuum on.
4. Set the desired vacuum speed with the speed selector button on the back of the vacuum.
5. Pull the trigger again to turn the vacuum off.
NOTE: The vacuum will always power on in “medium” speed mode. This mode is recommended for most
cleaning applications.
Using the attachments
Duster – for dusting and delicate surfaces such as blinds, fans, and hard surfaces
Crevice – for cleaning hard to reach places such as in between couch cushions and edge cleaning
Power head – for cleaning carpets, rugs, hard floors, stairs, and even upholstery
To Next Page
Loading...
