Maintenance
Emptying the dirt bin
Turn the vacuum off. The dirt bin can be emptied with it either connected to the vacuum body or
removed from the vacuum body.
To empty the dirt bin, simply hold the bin over a trash can and press the dirt bin release button. The dirt
bin lid will pop open and the dirt and dust will remove itself using the amazing power of gravity. Shake
the bin a couple of times and close the lid. If you removed the dirt bin from the vacuum body, now is the
time to reattach it. Now you’re ready to get back to cleaning!
To deep clean the dirt bin, remove the HEPA filter (see following section), then pull the inner cyclone out
of the dirt bin. Then you can hand wash the components or wipe them down with a damp cloth. Just
make sure everything is completely dry before using the vacuum again.
To Next Page
Loading...
