Download the PROMASTER TIMER REMOTE
App to your “i” device
Go to App STORE on your “i” device and search for
“ProMaster Timer Remote.”
Compatibility:
Requires iOS 6.0 or later. Compatible with iPhone, iPad, and
iPod touch. This app is optimized for iPhone.
Attach the receiver to your camera
1. Slide the receiver gently into your camera’s hot shoe as shown below. Rotate the lock
nut clockwise to tighten the receiver.
2. Attach the mini plug connector of ProMaster Camera Release Cable to the receiver
as shown. Plug the other end of the cable to the camera remote socket. (NOTE: The
appearance of this end of the cable will vary based on your camera.)
To Next Page
Loading...