You can increase/decrease the volume by increasing/decreasing the volume of your
mobile phone. The volume of your headset will be adjusted automatically. Please
consult your mobile phone’s manual for more information.
Adjusting Volume
To factory reset the headset, you will have to turn off the headset. Then press and
hold the MF-button for 8 seconds. If you see the red indicator light turns solid red
for 2 seconds, the factory reset is successful. The headset will go into pairing mode
automatically (Please refer to the ‘PAIRING THE HEADSET’ instruction above).
Factory Reset
If you cannot connect the headset with your phone:
Troubleshooting
8
To Next Page
Loading...
