Once Spire is successfully paired and connected with your mobile phone, you can
use it to make and receive calls. Spire can be used with voice dialing if your phone
supports the feature. Please consult your phone’s manual for more information.
• Using the phone keys to make a call: Dial a number on the phone as you normally
do. Once the call has been set up, the sound will be transmitted to Spire
automatically.
• Answering/Ending/Rejecting calls: When Spire is switched on and there is an
incoming call:
• Press the Multi-function button once to answer the call.
• Press the Multi-function button once to end the call.
• Long press the Multi-function button for 2 seconds to reject the call
• Put the call on hold. Press and hold the multi-function button for 2 seconds to put
the current call on hold and accept the call waiting. (The blue LED light flashes
with a prompt tone) Press the multi-function button twice again to resume to the
first call.
• Rotate your finger in a clockwise direction over the volume sensing area to
increase the volume of the speaker.
• Rotate your finger in an anti-clockwise direction over the volume sensing area to
decrease the volume of the speaker.
• Alternatively you may increase/decrease the volume by increasing/decreasing the
volume on your smartphone.
To Previous Page
Loading...
