Promax RG5410A-E - Operating Your RG5410 A-E; Normal Recovery; Self Purge; Auto Evacuate

Advanced Test Products Europe RG5410A-E
- 4 -
OPERATING YOUR RG5410A-E
Connect your RG5410A-E to a 230 V outlet. Switch the main power switch to the ON
position. You should hear the fan running. Press the compressor start switch. This
"momentary" switch will start the compressor. It may be necessary, under certain
circumstances, to press this switch more than once to start the compressor.
OPERATIONAL PROCEDURES
Do not turn this valve
while unit is running.
Close input valve, turn
machine off, switch to
Purge position and re-
start machine.
VAC
SENSOR
SELECT
ON
OFF
Do not turn this valve
while unit is running.
Close input valve, turn
machine off, switch to
Purge position and re-
start machine.
VAC
SENSOR
SELECT
ON
OFF
NOTE: To change from Recovery mode to Purge:
Close the Input port, turn the unit off (to prevent high pressure shutoff),
switch to Purge position and restart the unit.
NORMAL RECOVERY
SELF PURGE / AUTO EVACUATE