What to do if my ProMed Medical Equipment device does not warm up?
If the ProMed Medical Equipment device doesn't warm up, first ensure it's properly connected to the power supply by inserting the power plug into the socket and switching on the device. If it still doesn't warm up, make sure that the device is switched on. If problems persist, the device may be defective and should be sent to the manufacturer.
What to do if the letter 'E' is shown on the controller display screen of ProMed HGP-1.7?
If the letter “E” is shown on the controller display screen of your ProMed Medical Equipment, check the connection between the heating belt and the controller. Ensure that the controller plug (G) is correctly connected to the heating belt plug (H). If the issue continues, the device might be defective and should be sent to the manufacturer.
Overview of the heating belt's features and intended use.
Explanation of the symbol for double insulated appliances.
Indicates safety-relevant sections in the user manual.
Symbol indicating the manual must be read before use.
General| Brand | ProMed |
|---|---|
| Model | HGP-1.7 |
| Category | Medical Equipment |
| Language | English |
To Next Page
