DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
38
Press the “S”-button (H) and the wave form display flashes. Now either
press the “▲”-button (I) or the “▼”-button (J) to select the desired wave
form (SY or AL).
Press again the “S”-button (H) and the pulse-display flashes. Now
either press the “▲”-button (I) or the “▼”-button (J) to set the desired
pulse frequency from 3 Hz to 100 Hz.
Press again the “S”-button (H) and the pulse frequency-display flashes.
Now either press the “▲”-button (I) or the “▼”-button (J) to set the
desired relaxation pulse frequency from 0 Hz to 4 Hz.
Press again the “S”-button (H) and the pulse-width display flashes.
Now either press the “▲”-button (I) or the “▼”-button (J) to the desired
pulse width from 50 µs to 450 µs.
Press again the “S”-button (H) and the treatment time display of the
programme mode flashes. Now either press the “▲”-button (I) or the
“▼”-button (J) to set the desired treatment time of the programme mode
from 1min to 60 min.
Press again the “S”-button (H) and the working hours-display flashes.
Now either press the “▲”-button (I) or the “▼”-button (J) to set the
desired working hours from 2 seconds to 99 seconds.
To Next Page
Loading...
Need help?
General
