Need help?Do you have a question about the Prominence Home Talib 52 and is the answer not in the manual?
General| Fan Type | Ceiling Fan |
|---|---|
| Blade Size | 52 inches |
| Number of Blades | 5 |
| Motor Type | AC Motor |
| Motor Speed | 3 Speeds |
| Material | Metal |
| Reversible Motor | Yes |
| Light Kit Included | No |
| Control Type | Remote Control |
| Mounting Type | Downrod |
| Warranty | Limited Lifetime |
List of all components included in the fan package, numbered 1 through 20.
List of all hardware items provided for installation, labeled AA, DD, JJ, KK, MM.
Essential tools needed for fan assembly, including electrical tape and screwdrivers.
Optional tools that can assist during the fan installation process.
Diagram showing key dimensions (A, B, C, D) of the ceiling fan.
Installation method suitable for ceilings 8 ft. or higher, potentially requiring a longer downrod.
Installation method for angled or vaulted ceilings, up to 16 degrees.
Important safety warnings regarding installation, operation, and potential hazards.
Information on FCC compliance, potential radio interference, and safe operating practices.
Instructions to shut off power at the breaker before installation or servicing.
Guidance on installation codes and the prohibition of full-range dimmer switches.
Steps for turning off power and installing the mounting bracket to the outlet box.
Instructions for removing the downrod clip, pin, and loosening set screws.
Feeding wires through the downrod and assembling it with the motor and yoke.
Securing the downrod ball into the mounting bracket, ensuring proper alignment.
Installation of the secondary hanging system for safety, particularly in Canada.
Connecting fan wires to supply wires and securing the canopy to the mounting bracket.
Installing fan blades and attaching the switch housing to the fitter plate.
Securing the switch housing cap and attaching the pull chain extension.
How to use the reverse switch for summer (downward airflow) and winter (upward airflow).
Explanation of the four fan speed settings controlled by the pull chain.
Remedies for a fan that fails to operate, checking switches, wiring, and the reverse switch.
Solutions for fan noise, including checking screw tightness and wire connector placement.
Steps to address fan wobble, ensuring secure mounting and blade balance.
Details on warranty for motor and parts, including the one-year period for parts.
Information on what is not covered, such as damage from misuse or improper installation.
Procedure for obtaining service and making warranty claims.
To Next Page
